Case Study Of Nike, A Global Environment, Transportation...

Nowadays, businesses must think big. It is not enough to be the best in the city or even the country. The goal should be to go global and take advantage of the opportunities offered by the phenomenon of globalization and be part of the â€Å"global market†. This is rather ambitious but some companies have stepped out their country’s borders and have gained global recognition. This has been possible mainly thank to the important advances made in the 20th century, especially in the area of communication, transportation and new technologies. These advances have allowed many companies to extend their activities from a local scope to one of global scale, but this also means having to take more responsibility and act correctly. Globalized companies†¦show more content†¦It also had factories in China. In 1986, Nike expanded its product line to include apparel. Always following its business model: to market high-end consumer products manufactured in cost-efficient supp ly chains (Zaked, 2004), Nike requested its suppliers to open up manufacturing plants in Indonesia, China and Vietnam and helped its lead vendors establish an extensive network of foot wear factories throughout Southeast Asia where they could find cheap labor. But this expansion strategy put Nike under the scrutiny of groups that accused Nike of taking advantage of low wages and poor working conditions of factories in those lower-cost countries in order to increase their profits. Accusations of child exploitation, abusive treatment to workers and attempts of paying less than the minimum daily wage to workers were a consequence of Nike’s expansion strategy. †¢ Explain what the positive and negative impacts of this strategy were. One positive impact of Nike’s expansion strategy was that the location of the production facilities were close to raw materials and cheap labor sources. This allows for cheaper production (Enderle et al, 2000). Also, with its expansion into China, they tried to enter the clothing market. With nearly 1.357 billion Chinese people, they could have huge profits from that market alone (Wilsey and Lichtig, n.d.). As negative impacts, Nike received accusations of child exploitation, and manyShow MoreRelatedCase Study Of Nike, A Global Environment, Transportation And New Technologies1021 Words   |  5 Pagesor even the country. The goal should be to go global and take advantage of the opportunities offered by the phenomenon of globalization and be part of the â€Å"global market†. This is rather ambitious but some companies have stepped out their country’s borders and have gained global recog nition. This has been possible mainly thank to the important advances made in the 20th century, especially in the area of communication, transportation and new technologies. These advances have allowed many companiesRead MoreNike in China3150 Words   |  13 PagesExecutive Summary Overview Nike is the market leader in athletic shoes in the United States. The Oregon based company has always utilized offshore facilities in low-income countries to produce at minimal costs followed by importation into predominantly the US for sales. Nike is quick to divest from emerging markets as costs rise and has recently signed short term production contracts with a long term strategy of production in China. Unlike Nike’s previous global endeavors, the political and culturalRead MoreUnder Armour Is Gaining Market Share And Challenging Nike2043 Words   |  9 Pages Abstract Under Armour is gaining market share and challenging Nike in the sports apparel industry. However, Under Armour is having major issues with inventory management and managing cost. Inventory cost has increased steadily over the past three years and is now at the point where it is out weighing revenue. UNDER ARMOUR: CHALLENGING NIKE IN SPORTS APPAREL 3 CASE DESCRIPTION Under Armour, Inc., was founded in1996, by Kevin Plank, by a former University of Maryland footballRead Moremarketing strategy4037 Words   |  17 PagesModule Code: MKT 306 Nike – A report on Nike trainers from Nike Inc. and its market analysis in the UK. Submitted to University of Sunderland Submitted by: BIJAY GURUNG Student code: 109122858 BA (HONS) BUSINESS MANAGEMENT (YEAR 3) WORD COUNT: 3498 (excluding executive summary, references and relevant appendices) Table of Contents 1. Executive Summary†¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦.pg.3 2. Introduction†¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦..pg.4 3. Marketing Audit of Nike Inc. UK†¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦.†¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Read MoreAn Evaluation Of The Business Lego2310 Words   |  10 Pageswill be elaborated on and portrayed how they are incorporated throughout various businesses. Operations processes and strategies will be exemplified throughout the report and broken down further into the supply chain management, outsourcing and technology of a business. An evaluation of the business Lego will be presented and deliver how the business examines CSR and why consumers prefer their business compared to other leading competitors. 2.0 CORPORATE SOCIAL RESPONSIBILITY 2.1 LEGAL COMPLIANCERead MoreCarbon Emissions And Its Effect On The Environment1733 Words   |  7 Pagesemission and how to create efficiency transportation is a critical thing that enterprise needs to concern. According to HM’s annual reports, more than 50% percent of carbon emissions are from their transportation between the factories and stores, therefore, choosing more sustainable ways in transportation is one of a good resource to reduce the hurt for the environment. There are highly percentages of their shipments shipping via railway or sea, because sea transportation and train are relatively unpollutedRead MoreNike Inc. Case Study2161 Words   |  9 PagesNike, Inc. : Case Study in Operations Management MGT 441 Prepared for: Dr. Davidson, Concord University Prepared by: Jeremiah Nelson Johnathan Coleman Emily O’Dell December 4th, 2012 Introduction Low-cost, time-efficient manufacturing of goods is a key feature of a successful production company in today’s competitive global economy. Operations management, often abbreviated in the business world as OM, is defined as â€Å"...the set of activities that creates value in the form of goodsRead MoreNike- Managerial Case Study4914 Words   |  20 PagesNIKE Business Case Study Management Theory (BUS830-13) Submitted to: Dr. J. Saleeby Done by: Rola El Cheikh 201005281 Thursday, December 23, 2010 Executive Summary Nike hit the ground running in 1962. Originally known as Blue Ribbon Sports, the company focused on providing high quality running shoes designed especially for athletes by athletes, at competitive prices. Today, Nike is the worlds leading maker of athletic shoes, equipment and apparel. Nike has invested highly on marketingRead MoreNike- Managerial Case Study4930 Words   |  20 PagesNIKE Business Case Study Management Theory (BUS830-13) Submitted to: Dr. J. Saleeby Done by: Rola El Cheikh 201005281 Thursday, December 23, 2010 Executive Summary Nike hit the ground running in 1962. Originally known as Blue Ribbon Sports, the company focused on providing high quality running shoes designed especially for athletes by athletes, at competitive prices. Today, Nike is the worlds leading maker of athletic shoes, equipment and apparel. Nike has invested highly on marketing. It hasRead MoreImpact Of Globalization On The World1787 Words   |  8 PagesThis report will discuss the multiple roles of globalization in providing and transferring new and advanced technologies which, despite their significance, can severely damage the environment. This report will also be covering multiple aspects such as what we mean by globalization as a anomaly of changes. What technologies mean. What are the factors of globalization that supported it and what are the variables of it. First the term â€Å"globalization† must be defined. There are various definitions of Case Study Of Nike, A Global Environment, Transportation... Nowadays, businesses must think big. It is not enough to be the best in the city or even the country. The goal should be to go global and take advantage of the opportunities offered by the phenomenon of globalization and be part of the â€Å"global market†. This is rather ambitious but some companies have stepped out their country’s borders and have gained global recognition. This has been possible mainly thank to the important advances made in the 20th century, especially in the area of communication, transportation and new technologies. These advances have allowed many companies to extend their activities from a local scope to one of global scale, but this also means having to take more responsibility and act correctly. Globalized companies have more demands to innovate and work in a new manner, in a constant changing environment, in which stakeholders demonstrate a growing interest over their activities, especially in those related to sustainability. In a more globa l environment, companies need to develop new skills related to sustainability management. For this assignment we will analyze the case of Nike, a company whose expansion strategy made it the global poster child for corporate ethical fecklessness (Zadek, 2004). Nike was founded in 1964 by Phil Knight and Bill Bowerman at a time when the sport shoes market in America was dominated by expensive products manufactured in the United States and Germany. While completing his MBA in Finance from Stanford University,Show MoreRelatedCase Study Of Nike, A Global Environment, Transportation And New Technologies1021 Words   |  5 Pagesor even the country. The goal should be to go global and take advantage of the opportunities offered by the phenomenon of globalization and be part of the â€Å"global market†. This is rather ambitious but some companies have stepped out their country’s borders and have gained global recognition. This has been possible mainly thank to the important advances made in the 20th century, especially in the area of communication, transportation and new technologies. These advances have allowed many companiesRead MoreNike in China3150 Words   |  13 PagesExecutive Summary Overview Nike is the market leader in athletic shoes in the United States. The Oregon based company has always utilized offshore facilities in low-income countries to produce at minimal costs followed by importation into predominantly the US for sales. Nike is quick to divest from emerging markets as costs rise and has recently signed short term production contracts with a long term strategy of production in China. Unlike Nike’s previous global endeavors, the political and culturalRead MoreUnder Armour Is Gaining Market Share And Challenging Nike2043 Words   |  9 Pages Abstract Under Armour is gaining market share and challenging Nike in the sports apparel industry. However, Under Armour is having major issues with inventory management and managing cost. Inventory cost has increased steadily over the past three years and is now at the point where it is out weighing revenue. UNDER ARMOUR: CHALLENGING NIKE IN SPORTS APPAREL 3 CASE DESCRIPTION Under Armour, Inc., was founded in1996, by Kevin Plank, by a former University of Maryland footballRead Moremarketing strategy4037 Words   |  17 PagesModule Code: MKT 306 Nike – A report on Nike trainers from Nike Inc. and its market analysis in the UK. Submitted to University of Sunderland Submitted by: BIJAY GURUNG Student code: 109122858 BA (HONS) BUSINESS MANAGEMENT (YEAR 3) WORD COUNT: 3498 (excluding executive summary, references and relevant appendices) Table of Contents 1. Executive Summary†¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦.pg.3 2. Introduction†¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦..pg.4 3. Marketing Audit of Nike Inc. UK†¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦.†¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Ã¢â‚¬ ¦Read MoreAn Evaluation Of The Business Lego2310 Words   |  10 Pageswill be elaborated on and portrayed how they are incorporated throughout various businesses. Operations processes and strategies will be exemplified throughout the report and broken down further into the supply chain management, outsourcing and technology of a business. An evaluation of the business Lego will be presented and deliver how the business examines CSR and why consumers prefer their business compared to other leading competitors. 2.0 CORPORATE SOCIAL RESPONSIBILITY 2.1 LEGAL COMPLIANCERead MoreCarbon Emissions And Its Effect On The Environment1733 Words   |  7 Pagesemission and how to create efficiency transportation is a critical thing that enterprise needs to concern. According to HM’s annual reports, more than 50% percent of carbon emissions are from their transportation between the factories and stores, therefore, choosing more sustainable ways in transportation is one of a good resource to reduce the hurt for the environment. There are highly percentages of their shipments shipping via railway or sea, because sea transportation and train are relatively unpollutedRead MoreNike Inc. Case Study2161 Words   |  9 PagesNike, Inc. : Case Study in Operations Management MGT 441 Prepared for: Dr. Davidson, Concord University Prepared by: Jeremiah Nelson Johnathan Coleman Emily O’Dell December 4th, 2012 Introduction Low-cost, time-efficient manufacturing of goods is a key feature of a successful production company in today’s competitive global economy. Operations management, often abbreviated in the business world as OM, is defined as â€Å"...the set of activities that creates value in the form of goodsRead MoreNike- Managerial Case Study4914 Words   |  20 PagesNIKE Business Case Study Management Theory (BUS830-13) Submitted to: Dr. J. Saleeby Done by: Rola El Cheikh 201005281 Thursday, December 23, 2010 Executive Summary Nike hit the ground running in 1962. Originally known as Blue Ribbon Sports, the company focused on providing high quality running shoes designed especially for athletes by athletes, at competitive prices. Today, Nike is the worlds leading maker of athletic shoes, equipment and apparel. Nike has invested highly on marketingRead MoreNike- Managerial Case Study4930 Words   |  20 PagesNIKE Business Case Study Management Theory (BUS830-13) Submitted to: Dr. J. Saleeby Done by: Rola El Cheikh 201005281 Thursday, December 23, 2010 Executive Summary Nike hit the ground running in 1962. Originally known as Blue Ribbon Sports, the company focused on providing high quality running shoes designed especially for athletes by athletes, at competitive prices. Today, Nike is the worlds leading maker of athletic shoes, equipment and apparel. Nike has invested highly on marketing. It hasRead MoreImpact Of Globalization On The World1787 Words   |  8 PagesThis report will discuss the multiple roles of globalization in providing and transferring new and advanced technologies which, despite their significance, can severely damage the environment. This report will also be covering multiple aspects such as what we mean by globalization as a anomaly of changes. What technologies mean. What are the factors of globalization that supported it and what are the variables of it. First the term â€Å"globalization† must be defined. There are various definitions of

Juice Center Buisness Plan - 1874 Words

Juice Center Business Plan A B S T R A C T Business is ever changing; change is the only constant in business environment. Comprehensive business plan with clear Mission, objective considering Executive Summary ‘Sam’s Juice Center’ is unlike a typical Juice Center will provide excellent combination of Organic fruit and vegetable Juices at value pricing with fun and entertaining atmosphere. It is determined to become a dream place to overcome a day to day stress due to its pleasant ambiance and comfortable environment, making its customers to enjoy their each visit. In today’s highly competitive environment, it is becoming more difficult to differentiate one juice center from another. Sam’s Juice center does this by providing the only†¦show more content†¦b. On contrast, due to the harsh winters of Northern Illinois and the lake effect snow, the turnout of visitors for shopping during month of January and February will be comparatively less. This adds to the trouble as the normal demand for juice is slow during the winter season. Opportunities: 1. Differentiation by Price: By keeping competitive price with good quality and fresh products, consumers can be attracted towards juice center. By keeping the price comparable with cold and hot beverages the traditional cold drink and coffee consumers can also be attracted towards the juice center. 2. Promotion through health awareness: By providing the rigorous campaign on health and fitness awareness, customers can be diverted from cold beverages towards Organic Juice consumption. 3. Senior citizen factor: Due to the growing consumption of organic fruit and vegetable juices by senior citizens, concessional price for senior citizens can provide a stable and sustainable base to the juice center. This will also improve the resilience of organization towards market fluctuations. 4. Comprehensive Product range: By providing option of organic fruits and vegetable juices under one roof, diversified customer range can be satisfied. Threats: 1. New entrant and cost: Due to the rapid construction of new outlets, though it increases opportunities in development along with it

Microeconomics Principles and Policy Learning

Question: Discuss about the Microeconomics for Principles and Policy Learning. Answer: Introduction: In the perfectly competitive type market structure, there are a large number of buyers and sellers. All of the consumers as well as the producers have a clear idea regarding the prices of the products. The products are perfectly substitutes to each other. As opined by Baumol Blinder (2015), it can be mentioned that factor prices can be determined in the market under the forces of supply and demand. The differentiation lies in the determinants of supply and demand of the productive resources. The factors can be classified into four categories such as land, labor, capital, entrepreneurship. On the other hand, long run is assumed to be a phase, which is sufficiently long to allow the changes to be made in the number of firms in the industry. In the long run, an rise in demand will meet not only by the expansion of existing firms but also by the entry of new firms in the industry. According to Iossa Martimort (2015), the price of the factors under long run, the marginal revenue is equal to the average cost curve. The reason can be described, as an industry will be at equilibrium if all the firms in the market are making normal profits. Therefore, it can be inferred that the firms under long run will make normal profit if average revenue and average cost of the firms are equal. In addition, the entry of new firms in the perfectly competitive market under long run, the market supply curve will shift to the outward. From the above figure it can be observed that the market demand curve is remaining same. On the other hand, higher market supply will decrease the equilibrium market price where the price of the factors is equal to the long run average cost. In this point, each of the firm will make only normal profitability. In addition, it can be mentioned that there is no further opportunity for the movement of firms in and out of the market. Therefore, the long run market equilibrium will be occurred. Moreover, from the above figure it can be observed that the entry of new firms will shift the market supply curve from MS1 to MS2. As a result, the factor price will be declined from P1 to P2. Price ceilings are equivalent to the imposition of Taxation on the producers, which can reduce the producer surplus. Since the surpluses are converted to the customers, they are treated as subsidies. On the other hand, Rader (2014) mentioned that price floors are equivalent to the taxation on the customers. It can also reduce the consumer surplus and then transfer it to the others. In this context, it can be mentioned that price ceiling and price floors are similar as both create distortions from the equilibrium of market. As a result, the situation like dead weight loss will arise in the market. According to Klein (2014), price ceiling refers the legal maximum price level for a particular goods and services, whereas price floor refers the legal minimum price. Moreover, price ceiling generates if the legal price is lower than the market equilibrium price. It does not have any impact on the quantity supplied. Similarly, price floors formulate excess supply in the market when the equil ibrium market price is lower than the legal price. Although, price ceiling and price floor is equivalent in case of the imposition of taxation on the consumers, Angula Thomas (2014) cited that both are different from each other. In case of price ceiling, government set the price below the price level of the market equilibrium. In addition, price ceiling is an implicit tax, which imposes on the producers. On the other hand, implicit subsidy is imposed on the consumers in case of price ceiling. In case of price floor, the government of a country usually set the price above the level of market equilibrium price. Moreover, it can be mentioned that under-price floors, tax is imposed on the consumers and producers are subsidized. In this point, price ceiling is different from price floors. On the other hand, Baumol Blinder (2015) added, price floor is able to transfer the consumer surplus to the producers. References Angula, M., Thomas, B. (2014). Principles of microeconomics. Baumol, W. J., Blinder, A. S. (2015).Microeconomics: Principles and policy. Cengage Learning. Iossa, E., Martimort, D. (2015). The simple microeconomics of public?private partnerships.Journal of Public Economic Theory,17(1), 4-48. Klein, P. G. (2014). Information, Incentives, and Organization: The Microeconomics of Central Banking. InThe Fed at One Hundred(pp. 149-161). Springer International Publishing. Rader, T. (2014).Theory of microeconomics. Academic Press.

Seperation of a Mixture Lab Report Essay Example

Seperation of a Mixture Lab Report Paper In order to operate the iron from the mixture, take a bar magnet inside of a Copilot bag, and swirl it through the mixture. 5. The iron will stick to the magnet, and lift the magnet out of the mixture. All iron in the mixture should be on the magnet. 6. The iron taken out of the mixture is then measured to find the mass of the retrieved iron. 7. Next, the salt will be separated from the mixture. In order to do this, a ring stand must be set up with an iron ring and a glass funnel. Take a piece of filter paper and fold it as demonstrated by Mrs Monotone, and place it in the funnel. 8. Place a mall beaker under the funnel for the filtered water. 9. Put the remaining mixture in the funnel. 10. Pour some water in a beaker, record the amount of water and pour it in the funnel. The mixture will begin to filter and drain the salt, leaving behind the sand. More water may need to be added depending on if the salt particles are fully dissolved or not. 11. The sand has been recovered. Take the filter paper, unfold it, weigh its mass, and place it in the chemical oven to dry before measuring. 12. While the sand is in the chemical oven, take a hot plate, and place the beaker tit the filtered salt water on the hot plate. We will write a custom essay sample on Seperation of a Mixture Lab Report specifically for you for only $16.38 $13.9/page Order now We will write a custom essay sample on Seperation of a Mixture Lab Report specifically for you FOR ONLY $16.38 $13.9/page Hire Writer We will write a custom essay sample on Seperation of a Mixture Lab Report specifically for you FOR ONLY $16.38 $13.9/page Hire Writer The water will begin to boil, and eventually, the salt will be clearly visible and separated. 13. Once the salt is fully dried out, and no water remains in the beaker, remove the beaker with tongs for it will be extremely hot. Measure the beaker with the salt in it and subtract the original mass of the mall beaker to find the mass of the recovered salt. 14. The sand should be dry by now. Take the sand on the filter paper out of the chemical oven with extreme caution, place it on the scale, measure its mass, and then abduct the original mass of the filter paper in order to find the mass of the recovered sand. 15. The mixture is now separated into the three substances of sand, salt, and iron. Scientific Background: In order to complete this lab report, the following concepts must be understood. First, the difference between a mixture and a pure substance. A mixture is two or more pure substances combined, that keep their separate chemical identities and properties. The amounts of each pure substance in a mixture can change therefore the physical properties of a mixture depend on its composition, ND the composition of a pure substance is constant giving pure substances characteristic physical properties that do not change. Physical properties that are used to describe pure substances include solubility, magnetism, and boiling point, which are all characteristics used in this lab. The next concept is physical changes. Physical changes separate the components of a mixture, such as separating the iron, sand, and salt in this lab. Physical changes that can be used to separate mixtures include filtration, evaporation, and distillation. Mass recent composition is a way to express the real composition of a mixture by the amount of each component. In order to do this, the substances must be separated quantitatively. Lastly, percent yield which describes the efficiency of the recovery operation is calculated to separate the mixture. (Handout) Observations: The observations for this lab are as follows: The original mixture is a brownish color, and the difference between the different substances can easily be determined by sight. When the water was poured into the mixture of sand and salt during the filtration process, the altered water was coming through slowly in large drops. During the filtration process, the salt seemed to not be dissolving as quickly as thought, and more water was needed. When the salt water was being boiled, all of the sudden the water turned into what looked like foam and the salt started popping. When the sand was taken out of the chemical oven, salt particles that had not been dissolved were found on the bottom of the filter paper. The iron had a high magnetism, while sand and salt had none at all. The salt had a high solubility in water while the sand did not. The physica l appearance of the iron resembled rough tiny little black hairs. Data: The data for this lab is from data table B, as well as answers to post-lab questions 6 and 7. Data Table B: Separation of a Mixture: Mass of Original Mixture: 2. Egg Mass of Recovered Iron: . G Mass of Recovered Salt: . Egg Mass of Recovered Sand: . Egg Total Mass of Recovered Solids: 2. Egg Post-Lab Questions: 6. Mass percentage of salt: Mass percentage of sand: 46% Mass percentage of iron: 17% 7. Percent yield for salt = 46% Percent yield for sand = 47% Percent yield for iron = 29% Conclusion: Results: In this lab, the largest amount of recovered solids was the sand. The smallest amount of recovered solids was the iron. The total mass of recovered solids was greater than the original mixtures mass. Disunion: During this lab a mixture of the pure substances salt, iron, and sand were separated by different ways of physical change. The physical changes used in this lab report were filtration, evaporation, and distillation. The physical properties used in this lab report were magnetism, solubility, and boiling point. Error: The total mass of recovered solids was greater than the original mixtures ass. This could be because of inaccurate math or measurements. Also it was observed that in the chemical oven. Other ways that this lab could have obtained more accurate results would be using hot water during the filtration process instead of cold water. The hot water would most likely help to dissolve the tougher salt particles. The same filter paper used during lab was not the same filter paper that was measured for mass. This could have affected the ending result of mass of recovered sand, because the filter paper used could have been a different mass than the filter paper actually weighed.

How to Create a 2017 Job Search Roadmap

How to Create a 2017 Job Search Roadmap So you’ve set your career goals for 2017. (You totally have, right? If not, you still have time!) Yet unless you have some organization and a realistic timeline behind them, it’s likely that you’ll be in the same spot this time next year, wondering where the time went. Start the year with a roadmap like the sample one below, and you’ll be able to stay on track without overwhelming yourself with all job search elements at once.December: Start with a wish listWhere do you want to be in a year? What kind of role would you like to have? Before the new year even starts, take some time to think about what it is you really want to do. â€Å"A new job† doesn’t really cut it here- think about which job. Or if you want to keep the same kind of job you have now (or the one you had last), include specific companies you’d like to target.January-February: Do your due diligenceIf you haven’t already, dig in and research your target jobs or com panies. What is the general market for your industry and skill/experience level? Is there a particular hiring season? What kind of salaries are available in that field? Keep all of this information in a file (digital or old-school print) so you can go back to it later, or add to it as you come across new information.March-April: Resume makeover timeIf it’s been a while since you last overhauled the doc, it’s best to start from scratch. There are resume templates available online, or you can create your own. The important thing here is to make sure your current skills and achievements are not only listed, but maximized. Use strong action verbs, and avoid passive bullet points about â€Å"responsibilities.† And most importantly, proofread the heck out of it every time you add or change information.By the end of the month, when you feel like you’ve got a final draft, hand it over to a trusted friend to read and review for information that’s missing, c onfusing, etc.May-June: Interview rehearsalRemember that old joke that asks you how to get to Carnegie Hall? (Practice, of course.) It’s schticky, but it applies here as well. No matter how confident you feel in your ability to rock an interview, you should still set aside time to prep. You can start here, to get a refresher course on what to expect on interview day. Once you’ve done that legwork, practice how you’d respond to particular questions, and how you would frame the information in your resume.Practice in the mirror, practice with your goldfish, practice with a friend or family member until they’re sick of hearing about your problem solving skills. Practice your body language. Practice your winning interview smile like you’re prepping for the Miss America pageant.July-August: Skill buildingAre there skills required by your target job or skills that would make you an even better candidate for your dream company? Think of this as the equival ent of summer reading from when you were a kid. If there are classes available and it’s possible for you to take them, sign up! If there aren’t any available or they just don’t work for your schedule or budget, set aside a certain amount of time per week to do online research or talk with people who have expertise.September-October: ApplyOnce you feel like your foundations are good, start applying for job openings. Keep in mind that a lot of hiring takes place through personal recommendations and word of mouth, so also keep an eagle eye on your networks to see if anyone can help you get an in with one of your target companies.November-December: Keep up the huntKeep applying for openings as you see them, and don’t hesitate to go back to steps you completed earlier in the year if you feel the need. Always be vigilant for chances to boost your skills. Make sure your resume up-to-the-minute. Practice your suave, hire-me handshake. And don’t forget that so much of the job search is waiting for the right opportunity, so don’t be discouraged if you don’t see results right away.This yearlong roadmap is just a guide- if a different schedule works best for you, run with it! It might be that while you’re in the midst of interview bootcamp, your dream job opens up. So definitely keep an eye on opportunities throughout the year, and adjust your plan as necessary. The important part is that you’re setting a plan, and getting yourself in shape for the 2017 new-job marathon.

Rainbow Fire Halloween Jack-o-Lantern

Rainbow Fire Halloween Jack-o-Lantern Create a spectacular multicolored fire pumpkin for Halloween! This rainbow fire jack-o-lantern is easy to make.   Rainbow Fire Pumpkin Materials You only need a few basic materials for this project. The hand sanitizer contains alcohol, which is flammable, but self-extinguishes due to the water in the product. The boric acid or borax provides additional color to the flames. Carved Halloween jack-o-lantern (use a real pumpkin - plastic will melt!)Hand sanitizerBoric acid or borax What You Do Smear hand sanitizer all over the outside and inside of the jack-o-lantern.Dust the pumpkin with boric acid or borax. You dont need very much to achieve a nice colored effect. Just a light sprinkling will suffice,Ignite the jack-o-lantern.The flame goes out on its own fairly quickly as the alcohol in the hand sanitizer gets used up, leaving you with water. How It Works Boric acid or borax (either works) emit a green light when heated in a flame. The jack-o-lantern gives off a multicolored fire because you have the natural blue of the alcohol flame from the hand sanitizer, the green from the boric acid, orange light coming through the carved pumpkin, plus other colors from where the pumpkin juice mixes with the flame. The pumpkin flesh contains sodium, which imparts a yellow color to the fire. Tips and Safety You dont have to use boric acid or borax. Try other flame colorants for a different color blend.This is a fire project, so adult supervision is required.Be sure to perform this project on a fire-safe surface.You can extinguish the flame at any time by blowing it out.

Demand, Supply and Market Equilibrium Research Paper

Demand, Supply and Market Equilibrium - Research Paper Example The next thing is the connection between the law of diminishing marginal utility and the law of demand. The article describes the law of diminishing marginal utility that every additional unit brings lower satisfaction than the previous one. Therefore, every additional unit is given a lower price. Thus it is connected with the law of demand that the lower the price the higher the quantity demanded. Demand is defined as the willingness and ability of a consumer to buy a product. It is inversely related to price. When the price of good increases, its demand decreases and vice versa. The quantity of a good the consumer is willing to buy at specific prices is called a demand schedule. It shows how demand changes with the price. The graphical presentation of a demand schedule is called a demand curve. Utility is relevant to our course as we need to know about utility of a product to clear our views about what people pursue and pay for. Demand and its connection with the law of diminishing utility is also significant as we need to know about demand to see what people want and how much they want of a specific commodity and thus decide how it can be supplied. (Schafermeyer, 2000) Now the price change only changes the quantity demanded of a product but there are certain factors that change the entire demand of a product. ... In addition to that, the number of consumers is also directly proportional to demand. Consumer tastes and preferences have a strong impact on the demand as well. A good might be cheaper but the consumer may reject it if it doesn’t suit him. Moreover, if consumers expect the price to rise, they buy more of the existing stock and thus the demand increases. When the demand increases, the curve shifts towards the right and when it falls it shifts towards the left. The factors affecting the demand are a part of the learning requirement of our course as they change a force that controls the market. (Schafermeyer, 2000) The article defines Supply as the willingness and ability of a firm to produce a good at given price in a certain time period. Like demand, supply also has a relation with price but it is a direct one instead of an indirect one. When the price of a good rises, its supply rises. The quantity of a good supplied at a range of prices is called a supply schedule. The graph ical presentation of the supply schedule is called supply curve. The supply curve and its basics are also significant according to the syllabus as the second force controlling the market. (Schafermeyer, 2000) Apart from price, the cost of production also affects the supply. If the production costs are high then the producers will be reluctant to produce the good to avoid losses at lower prices. The number of sellers in a market also determines how much quantity will be supplied. Furthermore, the price of related goods also affects the supply of an object as the producers will shift to the good with a higher price. Lastly, if a seller expects the price to go up in some time then he will reduce the supply and wait for the right time to